Weld-On Hubs can be found in 3 styles to match the user’s preference for bushing mounting types. They happen to be stocked for apply with:
TB Bushings
QD Bushings
DST Bushings
All MasterDrive Weld-On Hubs are machined from metal.
Weld-On Hubs are commonly used in combination with plate type sprockets and conveyor pulleys to provide for even more shaft engagement.
Are manufactured to simply accept Taper Lock Bushings. Two types are available. Type S and Type W. Type S provides for a shorter size through the bore, and Type W a far more defined registration flange to aid with positioning and concentricity for welding.
Are manufactured to accept a QD design flanged bushing.
Accepts DST-Twice Split Taper design bushings.
These bushings are keyed to both shaft and hub. The external key provides positive drive without torque on the cap screws. DST bushings allow for the highest torque carrying capability.
The nitro weld on hubs are bored to size hubs that can be utilised with weld on sprockets, pulleys or even custom applications. Our hubs are an “X series” hub, this means they’re compatible with any “x series” sprockets or pulleys. Sprocket X hubs can be found in finished bore, sq . bore, hex bore, idler and splined bore. Bore sizes range between 1/2″ ID up to 1-1/2″ ID. The Nitro weld on hubs are manufactured from 1045 CD (freezing drawn) steel and finished with a dark-colored oxide coating.
Weld-On Hubs are made of steel, drilled, tapped and taper bored to receive Tapered
Bushings. They are very beneficial for welding into pulleys, plate sprockets, impellers,
agitators and several other devices which should be firmly fastened to the shaft.
Weld-on hubs are made of 1015-1025 steel, drilled, tapped and taperbored to receive the taper-lock bushing. They are of help for welding into supporter rotors, pulleys, plate sprockets, etc., which must be firmly mounted onto shafting. Four types of hubs can be found from stock.
Weld-on hubs are constructed with low carbon steel once and for all welding compatibility. They are useful for welding into admirer rotors, impellers, agitators, etc., which require secure installation to the shaft. A typical type comes in addition to the one which is specifically made for use in the long run disc of a conveyor pulley.
Type S Taper-lock – at first created for use in small sprockets, now well suited for many other lighter-duty applications
Type W/WA Taper-lock – rugged, full-duration size for single-hub, heavy-duty applications
Type F – includes a much larger flange diameter that can be welded into standard metal tubing to fabricate conveyor pulleys or process rolls
Type K – more compact design, especially useful for two-hub development, such as conveyor pulleys Taper-lock bushings
Both are constructed of steel materials with rugged, compact designs to accommodate most bushings sizes.
Ever-Power is a reliable distributor of precision weld-on hubs. Weld-on hubs works extremely well for welding to create “B” or “C” style sprockets and for additional applications. Exceptional dimensional hubs are available per your requirements on a made-to-order basis.
Manufactured from Metal to supply a convenient means to secure admirer rotors. Metal pulleys, platewheel sprockets, impellers etc. to a shaft. The Shouldered external diameter allows for easy location. Taper bored to match taper lock bush sizes 1210-5050.
Chain & Drives stock the complete range of Weld-On Hubs to check our coupling, pulley and sprockets share in a nutshell reach and long reach models. They may be utilized in assisting the utilization of taper suit bushes to melt your equipment to a motivated shaft.
Taperfit or QD weld-on hubs will be for make use of in the fabrication of conveyor pulleys, plate sprockets, enthusiasts and impellers. Weld-on hubs are created from low carbon steel once and for all welding compatibility.
Weld-in hubs are made from 1015-1025 steel, drilled, tapped and taperbored to get the Taperfit bushing. They are useful for welding into fan rotors, pulleys, plate sprockets, and should be firmly mounted onto shafting. Four types of hubs are available.
Weld on hubs can be found in many different styles such as for example: stock bore, finish bore, Q-bushed, taper-bushed, and BM-bushed. These hubs are made from bar steel and employed for welding to produce “B” design sprockets that include share bore, finished bore, and varieties of bushed sprockets. Special hub dimensions can be found per your specifications on a made-to-buy basis.