The Taper Attach Direct Thread Adaptor provides a direct thread interface for taper mounted suppressors. Two models of wrench flats make it equally simple to attach or take out from the suppressor or your firearm’s muzzle threads. No proprietary tools essential. Available in 1/2×28 and 5/8×24 with 18x1mm support coming soon. While it is hassle-free to have immediate thread suppressor ability that may move from web host to host without the need for additional muzzle products, it is important to remember that each host firearm should be checked for baffle alignment via visual inspection before firing.
The 1/2×28 Insert can be used with cartriges up to 30 caliber and the 5/8×24 works extremely well up to .338 caliber.
The use of direct thread adaptors enhances on immediate thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Mount Suppressor to Rule ALL OF THEM.
1.5 Ounce Weight
Wrench Flats for every contingency
Taper Mount Repeatability and Stability
Multi-Thread versatility for your Taper Attach Suppressor
taper adapters allow the use of holders or tools with a different machine-side taper then the equipment spindle taper, such as by using a BT40 tapping chuck on a 50-taper spindle.
These adapters eliminate lead time losses in case of a equipment breakdown. Adapters may also assist in testing custom equipment on another machine than the planned production machine.
Taper adapters avoid the necessity for a supply of new holders or tools for a specific machine. They arrive prepared to apply with built-in locked clamping mechanisms having a clamping screw on a ball bearing for steep taper clamping or HSK locking unit for taper clamping.
The steep taper may be the standardised form of an instrument taper for clamping tools in the primary spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (on the other hand with the Morse taper), thereby making tool alterations easier without clamping. This is particularly significant for Taper Adapter automatic tool changes
Small clamping travel equals short clamping time
High torsional rigidity due to the short distance between the leading edge and spindle bearing (short overall length)
For adapting morse taper equipment to milling equipment that take R8 tools
Alloy metal hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Tools More taper reducing sleeve is utilized to convert your headstock from #2 MT to #1 MT. That is useful assuming you have a travel middle or pen mandrel which is 1MT and your headstock is 2MT