Hanging Pulleys meant for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the power of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless may be the most corrosion resistant.
Designs C, D, and J possess a bracket on underneath for tying off one end of a rope.
Style K reduce the force needed to keep your load in place. Unlike regular pulleys, these possess a V-groove for more hold on your rope, plus they ratchet when under load therefore they won’t slip in the additional direction. Pulley for3/8″ dia. rope could be arranged to ratchet even when not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Install these pulleys to a flat surface to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Aluminium and nylon are light-weight and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also called sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Acetal and aluminum are light-weight and corrosion resistant. Galvanized steel is definitely more corrosion resistant than iron and metal. Stainless steel is the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Aluminum is more light-weight than stainless steel. Stainless is certainly more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless may be the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a set surface to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and deal with systems. They require about half the power of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Stainless steel is more corrosion resistant than steel.
Hanging Pulleys to get Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about 50 % the push of a single-groove pulley to go the same load. They have a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are simpler to convert than pulleys without a bearing.
Nylon is much lighter than metal. Aluminum is usually corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed. Use them to aid with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Use the bore to attach these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are easier to turn than pulleys with out a bearing.
Nylon pulleys are lighter in weight than steel pulleys.
Warning: Never make use of to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as for example block and deal with systems.They can reduce the force had a need to move the load by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about half the drive of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Style E pulleys have bracket upon the bottom that lets you tie off a single end of your wire rope.
Warning: Never use to lift people or items over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also known as snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a free rope end is not needed.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the power of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Design C to maintain rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys designed for Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as block and tackle systems. They are able to reduce the force had a need to move the strain by up to two times compared to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Style A pulleys have a bracket on underneath for tying off one end of a rope.
Warning: Never make use of to lift people or items over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end isn’t needed.
Warning: Never use to lift people or products over people.