Single and double reduction planetary gear drives to be utilized with electric, hydraulic, atmosphere motors or mechanical power insight from high acceleration, low torque sources to deliver reduced speeds at increased torques. The input side has regular SAE pads for engine mounting. Obtainable in the three output configurations demonstrated below. Many units could be furnished with an intrinsic hydraulic planetary drive parking brake.
One reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input velocity is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.
Wheel Drive
Input side has standard SAE pads and splined input. Output part has hub for mounting vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is usually standard on all wheel drives.
Shaft Output
Input side regular SAE pads with splined insight. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth due to wear. The external bearing nut supplies the supreme in shaft retention and shaft power. Output can be a spindle shaft or different sizes of integral pinion gears.