The EP Greenhouse geared motor is a compact and lightweight reduction gear reducer with an integrated limit switch system that’s suitable for assembly of a locally available electric engine. The gear driver is utilized in manually-managed or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-install EP reducer is usually rainproof and windproof. The gear reducer has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise gearbox for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is definitely locked when the reduction gear driver is not running. The completely sealed reduction geared motor has an expansion chamber with a diaphragm to keep the gear essential oil at a minimal pressure under all situations, even at high temperature ranges. Thanks to the use of an growth chamber, the gear reducer could be installed in any position. There are no limitations, because there is no dependence on a bleed connect. The sealed reduction gear driver keeps the apparatus oil of the gear reducer in ideal condition for its entire operating life time. The reducer is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gear motor comes with an FT85 motor assembly flange, to which the right IEC standard motor can simply be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an built-in chamber and is certainly enclosed by an impact-resistant plastic-type cover. The limit change system is accessible and simple to adjust. The limit change system’s optimum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gearbox for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).