Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control switch is still installed however the cord itself is normally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Program Notice” below for utilize in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you have got a pull-chain). If you order several electric motor at a time, we can do our best to supply your purchase with each one kind of control or the excess.
Application Note: Do NOT use this electric motor in a electric fan motor china nonfan software. This is a totally enclosed fan electric electric motor and designed to have continuous ventilation over the electric motor casing for cooling. The casing isn’t vented and the electrical engine will overheat and enter automatic thermal overload if run in a nonfan system where there isn’t solid ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the electric motor and lead it to proceed into automatic thermal overload. (Your companion blade from another producer may possess a steeper blade position.)
Origin: This electric engine is produced in China.