A chain and sprocket drive is a type of power transmission when a roller chain engages with two or more toothed wheels or sprockets, found in engines as a drivefrom crankshaft to camshaft.
Ever-electricity is proud to inventory a wide selection of Sprockets along with this huge variety of agriculture, gardening, cooking and outdoor items. We stand behind all 26,000 items we sell with this Satisfaction Guarantee. Customer Service is the cornerstone of us business, and has been for over 50 years.
Ever-power travel sprockets provide rugged, reliable service and feature replaceable tooth plates for easy field repair. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL as well as the 175 and 260 series use our non-symmetrical profile.
Travel sprockets weren’t always made to be bolted on. At one time they were welded onto the ultimate drive motor and needed to be lower off when they were replaced. Ultimately, welded-on adapters were installed that allowed the sprocket to be bolted on, and more modern designs utilize the bolted approach altogether.
When someone sends in a final drive motor for us to have a look at or?rebuild/reman, we advise them to remove the sprocket. We don’t need the sprocket in spot to evaluate the motor and the added excess weight (which can be significant) unnecessarily improves your shipping costs.
Signs of Sprocket Wear
The teeth on a travel sprocket are where you search for wear . They should be tall and flat by the end, not sharp or dished at the end. And the sprocket, and more specifically its teeth, commence to wear, its diameter becomes smaller sized. This causes what is known as a pitch mismatch, where in fact the the teeth on the sprocket no more interact with the track backlinks as effectively. This can accelerate the dress in of the sprocket and reduce the efficiency of your tools.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive motor.
Preventing Sprocket Wear
One of the key ways to prevent accelerated sprocket dress in is to check on the track stress. If the strain is too tight, it’ll cause wear on the sprocket tooth. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (particularly if there is definitely a build up of dried mud and particles). That’s the main explanation we put so very much emphasis on keeping the undercarriage clean
Without a functioning drive sprocket, your track drive won’t be able to propel your equipment. Fortunately, there are methods to help your travel sprocket go longer: keep carefully the track tension at a proper level and maintain your undercarriage clean.
The undercarriage of your track equipment should be inspected regularly. If you find early wear or damage to your tracks, a put on sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Monitor Loaders: T180, T190, T550, T590
Parts can vary based on your serial number.
All Ever-power sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The alternative and repair of tooth plate segments will not require removing of the drive shaft, bearings, etc. Ever-power also designs customized split hub pieces for retrofit applications that minimize discipline labor costs.
At initial glance, you might think that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-power offers added an I.D. lip and spiral band that captivate the needle bearing along with an external snap ring that improves performance and reliability. While easy to overlook, it’s this focus on depth that the racer provides come to expect from Ever-power.
An We.D. lip and spiral band that captivate the needle bearing
External snap ring caps sprocket about drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard