one.A connecting link of an O-ring Chain for standard application is pre-coated with grease at the pins. Prior to connection, verify the grease around the surfaces of pins, and should the amount of grease is modest, apply grease with bare hands. (If gloves are employed, the grease will probably be absorbed by the gloves.)
Instance: When the connecting website link (I) of an O-ring chain for common application is
shipped, O-rings are fitted with the roots of your pins. If your O-rings come loose due to vibration during transport, refit the O-rings in for the roots with the pins.
In this instance, be sure to return the grease collected at the roots of the pins on the central surfaces of your pins, a lot more at portion A than at portions B proven in the over illustration. (Portions A is worn on account of sliding using the bushings.)
two.The chain might be most simply linked within the teeth of a sprocket. Engage the hyperlinks at the two ends from the chain with the sprocket teeth and fit connecting pins. In case the sprocket might be moved, the chain can also be linked around the loosened side.
3. Connecting method
1.Confirm that O-rings are connected for the roots on the pins.
two.Should the quantity of grease utilized within the connecting pins is small, coat the pins with grease on the central portions.
3.Insert the connecting pins into the bushings on the inner links at each ends.
4.Confirm the grease is applied on the whole encounter with the O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins into the connecting plate and though pressing the connecting plate, set up the spring clip. Confirm regardless of whether the head (the finish without a split) of your spring clip is turned in the feeding route in the chain. (See the next illustration.)
6.Be sure you confirm that the spring clip is securely fitted within the clip grooves of the connecting pins.
This completes jointing with the connecting website link. Note that grease over the surfaces of connecting pins and O-rings is usually eliminated in the course of set up get the job done. In this case, re-grease employing the grease within the surface with the base chain or even the grease during the polyethylene bag through which the connecting link was contained.